How to Download P1 Server: A Complete Guide
If you are looking for a reliable and scalable access control system that can handle complex and multi-location implementations, you might want to consider downloading P1 server. P1 server is a Windows server-based application that enhances security and flexibility for your access control needs. In this article, we will show you what P1 server is, what are its benefits and features, how to install it, and how to use it.
What is P1 Server?
P1 server is an access control system developed by Entrypass, a leading provider of intelligent automation security technology solutions. It is designed from a Windows server-based application to enhance scalability and flexibility. It has powerful integrated features that make it adaptable to the most demanding access control structures. The P1 server is capable of supporting small and complex implementations, at multi-locations.
download p1 server
Benefits of P1 Server
Some of the benefits of using P1 server are:
It offers a high level of security with AES 128 encryption and peer-to-peer global anti-passback.
It allows you to manage multiple devices and locations from a single platform.
It supports various access control modes such as door interlocking, lift access control, online guard tour, location tracking, roll call counting, etc.
It provides comprehensive reporting and monitoring features such as online transaction event, event based triggering, interactive device control, alarm monitoring, time attendance report, CCTV integration module, etc.
It is easy to install and configure with wizard based configuration and active download.
Features of P1 Server
Some of the features of P1 server are:
It supports unlimited access level configuration and customizable card format.
It has an interactive floor plan that shows the status of devices and events.
It has a user-friendly interface that allows you to control and manage your access control system easily.
It is compatible with various devices such as readers, controllers, cameras, etc.
It can be integrated with other systems such as CCTV , fire alarm, intrusion alarm, etc.
How to Install P1 Server
Installing P1 server is not difficult if you follow the steps below. Before you start, make sure you have the following requirements:
Requirements for P1 Server
You will need the following hardware and software to install P1 server:
A Windows server computer with at least 4 GB of RAM, 500 GB of hard disk space, and a network card.
A Windows operating system such as Windows Server 2012 R2, Windows Server 2016, or Windows Server 2019.
A P1 server installation CD or a downloaded file from the Entrypass website.
A license key that you can obtain from Entrypass or your authorized dealer.
An internet connection for activation and updates.
Access control devices such as readers, controllers, cameras, etc that are compatible with P1 server.
A network switch or router that can connect your devices and server.
Steps to Install P1 Server
Once you have the requirements ready, you can follow these steps to install P1 server:
download p1 server software for access control
download p1 server installation and networking guide
download p1 server configuration guide for dell
download p1 server for intelligent automation security
download p1 server for windows server-based application
download p1 server datasheet and features
download p1 server for korea superconducting tokamak advanced research
download p1 server for nuclear fusion experiment
download p1 server for entel private network
download p1 server for online transaction event
download p1 server for door interlocking and global anti-passback
download p1 server for active download and unlimited access level
download p1 server for customizable card format and interactive floor plan
download p1 server for event based triggering and interactive device control
download p1 server for alarm monitoring and roll call counting
download p1 server for location tracking and lift access control
download p1 server for online guard tour and aes 128 encryption
download p1 server for time attendance report and various reporting module
download p1 server for cctv integration module and system configuration diagram
download p1 server for technical specifications and resources
download p1 server with dhcp or static ip address
download p1 server with power on and power off instructions
download p1 server with siting and power requirements
download p1 server with network configurations and options
download p1 server with complete features overview and wizard based configuration
how to download p1 server from entrypass website
how to download p1 server from entel website
how to download p1 server from new scientist website
how to install and configure p1 server after downloading
how to troubleshoot and update p1 server after downloading
benefits of downloading p1 server for access control system
benefits of downloading p1 server for nuclear fusion research
benefits of downloading p1 server for private network communication
comparison of downloading p1 server vs other access control software
comparison of downloading p1 server vs other nuclear fusion reactors
comparison of downloading p1 server vs other private network servers
best practices for downloading p1 server securely and safely
best practices for downloading p1 server efficiently and quickly
best practices for downloading p1 server without errors or interruptions
reviews and testimonials of downloading p1 server from customers and users
Insert the P1 server installation CD into your server computer or run the downloaded file from the Entrypass website.
Follow the instructions on the screen to install the P1 server application. You will need to enter your license key and activate your product online.
After the installation is complete, launch the P1 server application from your desktop or start menu.
Configure your network settings for your server and devices. You have three options to do this: DHCP, Static IP, or Manual Configuration.
Option 1: DHCP
If you want to use DHCP (Dynamic Host Configuration Protocol) to assign IP addresses to your devices automatically, you can do the following:
Connect your devices and server to a network switch or router that supports DHCP.
On the P1 server application, go to System > Network Settings > DHCP Settings.
Select Enable DHCP and click Apply.
The P1 server will scan and detect your devices automatically and assign them IP addresses.
You can check the status of your devices on the Device List tab.
Option 2: Static IP
If you want to use Static IP to assign IP addresses to your devices manually, you can do the following:
Connect your devices and server to a network switch or router that does not support DHCP or disable DHCP on it.
On the P1 server application, go to System > Network Settings > Static IP Settings.
Select Enable Static IP and enter the IP address, subnet mask, gateway, and DNS for your server and devices. Make sure they are in the same network range and do not conflict with each other.
Click Apply and restart your server and devices for the changes to take effect.
You can check the status of your devices on the Device List tab.
Option 3: Manual Configuration
If you want to use Manual Configuration to assign IP addresses to your devices using a web browser, you can do the following:
Connect your devices and server to a network switch or router that does not support DHCP or disable DHCP on it.
On each device, press and hold the reset button for 10 seconds until the LED flashes red. This will reset the device to its factory default settings.
On your computer, open a web browser and enter the default IP address of each device. The default IP address is 192.168.0.100 for controllers and 192.168.0.101 for readers. The default username and password are admin/admin.
On the web interface of each device, go to Network Settings and enter the IP address, subnet mask, gateway, and DNS for each device. Make sure they are in the same network range and do not conflict with each other. You can also change other settings such as device name , device ID, device type, etc.
Click Save and restart each device for the changes to take effect.
On the P1 server application, go to System > Network Settings > Manual Configuration.
Select Enable Manual Configuration and click Scan. The P1 server will scan and detect your devices and show them on the Device List tab.
How to Use P1 Server
After you have installed and configured P1 server, you can start using it to manage your access control system. Here are some of the things you can do with P1 server:
Access Controller Software
The Access Controller Software is the main interface of P1 server. It allows you to control and monitor your devices, events, alarms, reports, etc. You can access it from your desktop or start menu. You can also access it remotely from any web browser by entering the IP address of your server and the port number 8080. For example, The default username and password are admin/admin.
System Configuration Diagram
The System Configuration Diagram is a graphical representation of your access control system. It shows the connection and status of your devices, such as readers, controllers, cameras, etc. You can access it from the Access Controller Software by clicking on the System Configuration Diagram icon on the toolbar. You can also drag and drop devices from the Device List tab to the diagram to add them. You can zoom in and out, pan, rotate, and edit the diagram as you wish.
CCTV Integration Module
The CCTV Integration Module is a feature that allows you to integrate your CCTV system with your access control system. It enables you to view live video feeds from your cameras, record video clips based on events or alarms, and playback recorded videos. You can access it from the Access Controller Software by clicking on the CCTV Integration Module icon on the toolbar. You can also configure your cameras and video settings from the CCTV Integration Module tab.
Conclusion
P1 server is a powerful and flexible access control system that can handle complex and multi-location implementations. It offers a high level of security, scalability, and functionality for your access control needs. It is easy to install and use with various options for network configuration and device management. It also provides comprehensive reporting and monitoring features that enhance your security and efficiency. If you are looking for a reliable and scalable access control system that can handle complex and multi-location implementations, you might want to consider downloading P1 server.
FAQs
Q: How much does P1 server cost?
A: P1 server is a licensed product that requires a license key to activate. The cost of the license key depends on the number of devices and locations you want to support. You can contact Entrypass or your authorized dealer for more information.
Q: How do I update P1 server?
A: You can update P1 server by downloading the latest version from the Entrypass website or using the online update feature on the Access Controller Software. You will need an internet connection for both methods.
Q: How do I backup P1 server?
A: You can backup P1 server by using the backup feature on the Access Controller Software. You can choose to backup your database, configuration files, or both. You can also restore your backup files from the same feature.
Q: How do I troubleshoot P1 server?
A: You can troubleshoot P1 server by using the diagnostic tools on the Access Controller Software. You can check the status of your devices, events, alarms, network, etc. You can also view the log files and error messages for more details.
Q: How do I contact Entrypass for support?
A: You can contact Entrypass for support by visiting their website at or calling their hotline at +603-8066 9988.
44f88ac181
Comentários